Singapore Singapore Announces Exemptions from Regulatory Controls on MCCPs and LC-PFCAs

Singapore Announces Exemptions from Regulatory Controls on MCCPs and LC-PFCAs

On November 6, 2026, Singapore issued a circular titled Updates on Exemptions for MCCPs (Chlorination Levels ≥ 45% Chlorine by Weight) and LC-PFCAs in Singapore. The circular establishes exemptions from the regulatory controls that will apply in Singapore from December 16, 2026, under the Stockholm Convention for the following substances:

  • Chlorpyrifos
  • Medium-chain chlorinated paraffins (MCCPs) (C14-C17, with a chlorine content of 45 percent or more by weight)
  • Long-chain perfluorocarboxylic acids (long-chain PFCAs or LC-PFCAs) (C9-C21), their salts, and related compounds

 

The National Environment Agency (NEA) previously received feedback from industry stakeholders indicating that, for certain specific applications, MCCPs and LC-PFCAs continue to play a critical role and that no feasible alternatives are currently available. As a result, additional exemptions have been established and set out in Annex I of the circular.

 

Exemptions

The exemptions specified in Annex I of the circular are as follows. No exemptions have been designated for chlorpyrifos.

Chemical Substance Exemptions Permitting Manufacture, Import/Export, and Use
Medium-chain chlorinated paraffins with chain lengths at least C14 but not exceeding C17 (MCCPs) (chlorination levels ≥ 45% chlorine by weight) and their products (a) Adhesives and sealants, limited to:

i. Aerospace and defense applications

ii. Waterproofing coatings and anti-corrosion coatings

(b) Finished electrical and electronic equipment (EEE), related components, and auxiliary materials

(c) Flexible elastomeric foam insulation materials

(d) Flexible polyvinyl chloride (PVC), limited to:

i. Construction applications, including maintenance of buildings and other structures (excluding flooring used in indoor spaces not intended for commercial purposes)

ii. Wires and cables used in medical devices and in vitro diagnostic medical devices

(e) All medical devices listed in the First Schedule to the Health Products Act

(f) Metalworking fluids used in professional or industrial settings equipped with recovery systems, limited to use as extreme-temperature and extreme-pressure additives in metalworking fluids used for “heavy duty” processes (1) in the manufacture and repair of metal and metal-alloy components(2).

(1) “heavy duty” processes include deep drawing, broaching, fine blanking with ironing; precision metalworking (cutting, punching, and drilling), tapping, cold drawing, cold rolling (pilgering), pressing, forging, and grinding.

(2) Metal alloy include alloys metals and alloys of these metals: stainless steel, titanium, nickel, aluminium, copper and beryllium.

(g) Polymers and rubber used for replacement parts and repairs where the substance was originally used in the manufacture of the following articles:

i. Parts for on-road motor vehicles and machinery used in agriculture, construction, forestry, and landscaping;

ii. Electrical and electronic equipment used in medical devices, in vitro diagnostic devices (IVDs), and instruments for measurement, analysis, manufacturing, control, monitoring, testing, and inspection;

iii. Aerospace and defense applications

(h) Semiconductors, semiconductor manufacturing equipment and related support systems, related components, and auxiliary materials

(i) Tape used for non-structural bonding in aerospace and defense products

Long-chain perfluorocarboxylic acids with chain lengths at least C9 but not exceeding C21, their salts, related compounds (LCPFCAs) and their products (a) Replacement parts for motor vehicles (all land -based vehicles) that are no longer in mass production

(b) Semiconductors designed for replacement parts associated with products that are no longer in mass production

Uses covered by these exemptions will not be subject to licensing requirements. However, the NEA intends to review the exemptions in light of the availability of feasible alternatives and ongoing feedback from industry.

 

Annex II

The relevant HS codes and product codes are provided in Annex II of the circular. Traders importing or exporting the substances listed in Annex II must obtain a TradeNet permit. All such permit applications are administered by the Chemicals Control and Management Department (CCMD).

 

References

Information on hazardous substances management is also available on the NEA website:

Author / Responsibility

ONO Kanami

Consultant, EnviX Ltd.

Business Performance

Researcher specializing in Southeast Asia, particularly the Philippines and Singapore.

Background

Bachelor of International Relations, University of Shizuoka

k.ono.envix