On October 21, 2026, the Australian Industrial Chemicals Introduction Scheme (AICIS) published a draft evaluation statement on the introduction (import or manufacture) and use of PFAS in Australia and opened a public comment period. The deadline for comments is December 2, 2026. The evaluation aims to identify the actual introduction volumes, types, and end uses of the 522 PFAS listed on the Australian Inventory of Industrial Chemicals (AIIC). This evaluation does not assess the human health or environmental impacts of PFAS. Based on the evaluation data, AICIS will determine the priorities for future evaluation work, which will include PFAS risk assessments.
Previously, in October 2025, AICIS requested that registrants of the 522 PFAS provide information regarding the introduction of these chemicals between September 1, 2023, and August 31, 2025.
Below is an excerpted summary of the draft evaluation statement from AICIS:
Summary of the draft evaluation statement
- The introduction of all 522 PFAS listed on the Inventory was entirely through importation, and no manufacture in Australia was reported for industrial uses.
- Of the 522 listed PFAS, 139 were introduced over the two-year reporting period from 1 September 2023 to 31 August 2025. Among these, 91 were for industry and/or public end uses, and 48 were exclusively for research and development (R&D).
- The primary end uses for PFAS are lubricants and greases, paints and coatings, and adhesives and sealants.
- AICIS will prioritize the evaluation of 25 currently unassessed PFAS out of the 91 identified for industry and/or public end uses.
- The first proposed evaluation is for trifluoroacetic acid (TFA, CAS Registry Number: 76-05-1), a common degradation product of PFAS.
Following the close of the public comment period, AICIS will review the received comments and issue a final evaluation statement.
EnviX Insight: PFAS in Australian chemical inventory
In Australia, introductions of “designated fluorinated chemicals” (including PFAS) are categorised as “assessed introductions.” Introducers must apply to the authority (AICIS) for an assessment certificate prior to introducing a designated fluorinated chemical. If the authority approves the application and issues an assessment certificate, the introducer may introduce the chemical in accordance with the conditions specified on that certificate. Five years after the assessment certificate is issued, the chemical is then listed on the Australian Inventory of Industrial Chemicals (the Inventory). In other words, all new PFAS listed on the Inventory under AICIS have already been assessed. Conversely, chemicals listed on the Inventory under the previous scheme (NICNAS) may not have undergone an assessment by the authority. Consequently, AICIS is conducting evaluations to gather data and prioritise these unassessed listed PFAS for future risk assessments.
Reference
Draft PFAS Evaluation Statement (EVA00204) (October 21, 2026)
https://www.industrialchemicals.gov.au/sites/default/files/2026-10/EVA00204%20-%20Draft%20evaluation%20statement%20-%20Per%20and%20poly%20fluoroalkyl%20substances%20-%2021%20October%202026.pdf
Public Comment Page for the Draft Evaluation Statement
https://www.industrialchemicals.gov.au/consultations/have-your-say-draft-evaluation-statement-pfas-introduction-and-use-australia
Australia’s AICIS Publishes Draft Evaluation Statement on PFAS Introduction and Use
